Xpeed 3 - Gruppo Fabbri

XPEED 3

XPEED 3 is the compact tray sealer by Gruppo Fabbri suitable for the packaging of fresh foods with Lid trays and film for medium-high productivity automatic lines. XPEED 3 brings innovations in tray in-feed, gas consumption, flexibility and format change. XPEED 3 provides features normally characterizing top-of-the-range machines, being the only tray sealer in its segment with both double line and single line in-feed. Made of stainless steel for maximum durability in harsh environments, XPEED 3 is suitable for a wide range of applications such as: vacuum gas for protective atmosphere in the medium and long term with minimal levels of residual oxygen, gas flushing, skin, “Ecogas”, protruding product, only sealing. With XPEED 3 Gruppo Fabbri brings innovation to the segment of tray sealing based on the best Italian engineering and a deep understanding of the food packaging market.


Main characteristics
Electric panel above everything else.All electrical and electronic parts are located away from the floor and work areas, and for further protection the cables run inside the hollow sections, protecting them from accidental shocks and spills. Total guarantee for better durability and reliability.
The real Plug-&-Pack.XPEED 3 is ready to be delivered, handled and installed as a single unit. This saves time during installation and eliminates any types of set up problems, without the need for special tools for assembly
The speeds thar are needed.Up to 10 cycles/minute in vacuum-gas mode; up to 12 cycles/minute in only sealing, for a maximum productivity of 144 packages a minute.
Hygiene, safety, strength: the facts.XPEED 3 has been built to reduce the surface discontinuities and flat areas where dirt, dust, liquids and production residues can easily accumulate. The 1,600 kg of stainless steel is the best guarantee for long service life and aluminium alloys have been used for the fast-moving parts. Work area designed for IP65 wash.
Patented Eco-Gas punching tool.XPEED 3 is equipped with the Eco-Gas punching tool, the Gruppo Fabbri patent that allows for the use of up to 50% less gas mixture compared to the best tray-sealers available on the market. A saving that can be seen immediately. Try it to believe it.
Size: we take up space only where needed.A footprint of 1.5 m2 ensures total accessibility under the power supply and exit conveyor. This makes the work area very comfortable for operators, allowing for quick and efficient cleaning operations.
Format change: time is moneyThe size change takes a minimum time of about 10 minutes, from stop to "ready for packaging". The absence of preheating and liquid cooling stations means less time for production to resume, lower power consumption and no need for expensive equipment.
Easy access for mould change, cleaning and inspection.The safety guards offer great accessibility to each work area of the machine, from the mould to the upper electric cabinet, from the power supply to the pneumatic parts. The particular care in the design of the packaging area, both for free sizes as well as for the minimisation of protruding parts, reveals great attention paid to the comfort of the operators.
High flexibility and efficiency: there is nothing like it.XPEED 3 can package with single-line and double-line moulds, maximising productivity in accordance with real client needs. The double-line version can be converted to single-line in a few moments, requiring an actual length of time very close to that for format change. The machine is available in right and left versions.
Guaranteed sealing.XPEED 3, in combination with the best performing film in the market, ensures excellent sealing even at maximum speed, guaranteeing the highest safety standards to clients.
The library of packaging:
aesthetics and substance
Vacuum-gas, gas flushing, eco-gas mode, only sealing, outside cut, inside cut, skin, overflowing product, facilitated opening, moulded film.
Suitable for any tray, in every direction.The particular patented tray transport system allows XPEED 3 to handle packages of the same size but different heights, from 20 mm to 120 mm.
A made-to-measure covering.Like all packaging by Gruppo Fabbri, XPEED 3 can be customised according to client requirements, ensuring maximum operational performance at the best price possible.
Many materials, one solution.XPEED 3 handles all the trays and film suitable for tray-sealing packaging: foam polystyrene, polypropylene, aluminium, PET, skin pads, and more.
Optional devices
Gas flushing, vacuum/gas, eco-gas, skin, only sealing.
Inside cut, outside cut, easy opening, protruding products.
Mould safety kit.
Photocell for registered printed film.
Photocell for product exit control.
Tool change chariot and safety fixing mould kit.
1 -2 rows in-feed divider.
Motorized in-feed and exit conveyors of different lengths.
Server TCP/IP connection.
Teleservice and other optional features.
DOWNLOAD
1.5
A footprint of less than 1.5 m2.
8
Packaging modes
10
About 10 minutes for format change.
12
Packaging speed up to 12 packages/minute.
65
IP65 degree of protection in work areas.
144
Speed. Up to 144 packages/minute.
135
Min. tray size: 170 x 135 x 20 mm (L x W x H mm).
170
Min. reel width: 170 mm.
420
Mould max. width: 420 mm
460
Max. reel width: 460 mm.
500
Max. tray size: 400 x 500 x 120 mm (L x W x H mm).
900
Punching tool length 900 mm.
1600
Weight 1600 kg.
Xpeed 3, details - Gruppo Fabbri Xpeed 3, technical drawings - Gruppo Fabbri Xpeed 3, details - Gruppo Fabbri